LE SERIES

Economical Low Leakage Section Filter

FCl's most economical and compact section filter provides a useful combination of differential (L/L) and common mode (L/G) performance in a low leakage current design.

LE Series filters are designed for general purpose applications including supplementary filtering of switch mode power supplies with internal EMI filters.

Enhanced common mode (L/G) performance is available with the "B" circuit option (see Filter Order Information).

Schematic

Schematic-LE SERIES

click on the to go the mechanical drawing

Part Number¹ Current Flange Connector End Mount Leakage²

LE5 5.0A -- .30mA

LE10 10.0A -- .30mA

LE15 15.0A -- .45mA

LE20 20.0A -- .45mA

LE30 30.0A -- -- .80mA

LE40 40.0A -- -- .80mA

LE75L 75.0A -- 1.2mA

LE100L 100.0A -- 1.2mA

Rated Voltage: 250VAC, 50/60Hz

Test Voltage: Line to Line: 1.7 KVDC
Line to Gnd: 2.2 KVDC

Insertion Loss: (50 ohms, typical)

.05MHz .15MHz .50MHz 1.5MHz 5.0MHz 20MHz

L/L 8db 12db 45db 65db 65db 60db

L/G³ 10db 20db 32db 40db 45db 50db

1 Suffix "L" calls out low profile case, see Filter Order Information for complete part number
2 Each line to ground @ 250VAC/5OHz
3 "B" option can add up to 6db in application

EMI Filter division, 22895 East Park Drive, Yorba Linda, CA 92887, USA
Tel: (714)221-4056, Fax: (714)289-2149, Toll Free: +1-800-527-4362
Contact Us Site Map


Part Number¹	Current	Flange	Connector	End Mount	Leakage²
LE5	5.0A			--	.30mA
LE10	10.0A			--	.30mA
LE15	15.0A			--	.45mA
LE20	20.0A			--	.45mA
LE30	30.0A		--	--	.80mA
LE40	40.0A		--	--	.80mA
LE75L	75.0A		--		1.2mA
LE100L	100.0A		--		1.2mA

Rated Voltage: 250VAC, 50/60Hz			Test Voltage: Line to Line: 1.7 KVDC Line to Gnd: 2.2 KVDC
Insertion Loss: (50 ohms, typical)

	.05MHz	.15MHz	.50MHz	1.5MHz	5.0MHz	20MHz
L/L	8db	12db	45db	65db	65db	60db
L/G³	10db	20db	32db	40db	45db	50db