SX Series Enhanced Performance AC Filters

SX SERIES

Enhanced Performance Switch Mode EMI Filter

With additional line inductors, the SX Series section filters provide up to 15 db of enhanced performance to solve severe conducted EMI problems in the FCC or CISPR/EN spectrums.

SX Series filters are available in standard current ratings of 3 Amps to 60 Amps and with the "A" circuit option (see Filter Order Information), providing high performance over a wide range of load currents and source impedances.

Schematic

click on the to go the mechanical drawing

Part Number¹ Current Flange Connector End Mount Leakage²

SX3 3.0A -- 0.8mA

SX7 7.5A -- 0.8mA

SX7L 7.5A -- -- 0.8mA

SX15 15.0A -- 1.4mA

SX20 20.0A -- 1.4mA

SX30 30.0A -- 1.4mA

SX45 45.0A -- 1.8mA

SX60 60.0A -- 2.2mA

Rated Voltage: 250VAC, 50/60Hz

Test Voltage: Line to Line: 1.7 KVDC
Line to Gnd: 2.2 KVDC

Insertion Loss: (50 ohms, typical)

.05MHz .15MHz .50MHz 1.5MHz 5.0MHz 20MHz

L/L 30db 60db 65db 65db 60db 50db

L/G³ 20db 60db 65db 65db 60db 55db

1 Suffix "L" calls out low profile case, see Filter Order Information for complete part number
2 Each line to ground @ 250VAC/5OHz
3 "A" option can add up to 6db in application

EMI Filter division, 22895 East Park Drive, Yorba Linda, CA 92887, USA
Tel: (714)221-4056, Fax: (714)289-2149, Toll Free: +1-800-527-4362
Contact Us Site Map


Part Number¹	Current	Flange	Connector	End Mount	Leakage²
SX3	3.0A			--	0.8mA
SX7	7.5A		--		0.8mA
SX7L	7.5A		--	--	0.8mA
SX15	15.0A		--		1.4mA
SX20	20.0A		--		1.4mA
SX30	30.0A		--		1.4mA
SX45	45.0A		--		1.8mA
SX60	60.0A		--		2.2mA

Rated Voltage: 250VAC, 50/60Hz				Test Voltage: Line to Line: 1.7 KVDC Line to Gnd: 2.2 KVDC
Insertion Loss: (50 ohms, typical)

	.05MHz	.15MHz	.50MHz	1.5MHz	5.0MHz	20MHz
L/L	30db	60db	65db	65db	60db	50db
L/G³	20db	60db	65db	65db	60db	55db