A3T SERIES

3 Phase Delta Severe Environment EMI Filter

A3T Series 3 phase power line filters are designed to filter typical switch mode power conversion devices required to meet MIL STD 461 conducted emissions while maintaining low ground leakage currents.

Schematic

click on the to go the mechanical drawing 

Part Number1	Current	Flange	End Mount		Leakage2
A3T5	5.0A/PH				2.0mA
Rated Voltage 250 VAC @ 50/60 Hz Rated Voltage 125 VAC @ 400 Hz				Test Voltage: Line to Line: 1.2 KVDC Line to Gnd: 2.2 KVDC
Insertion Loss: (50 ohms, typical)
	.02MHz	.05MHz	.15MHz	1.5MHz	5.0MHz	50MHz
L/L	24db	34db	65db	65db	65db	60db
L/G3	21db	50db	65db	65db	65db	60db

1 See Filter Order Information for complete part number
2 Each line to ground @ 250VAC/5OHz
3 "A" option can add up to 6db in application

Main | Application Notes | Filter Finder | AC Filters | DC Filters
Three Phase Filters | Home Automation Filters | Custom EMI Filters

EMI Filter division, 22895 East Park Drive, Yorba Linda, CA 92887, USA
Tel: (714)221-4056, Fax: (714)289-2149, Toll Free: +1-800-527-4362
Contact Us Site Map